CNC machines lining a factory aisle as an operator inspects a freshly machined part

Come see
the shop floor

JUCHENG runs two buildings and 42 machines in Taichung, taking parts from prototype to production on one site. Buyers and quality teams can walk the plant here first, then book a time to see it in person.

The plant on night shift, with a row of 5-axis machines lit from inside as a staff member patrols the aisle

The main lights are off.
The 5-axis machines keep running.

Every part passes
through these five zones

Click a zone on the plan to see what happens there, which machines it holds and who runs them. The yellow dashed line is the route a part takes through the plant.

Plant 1 · Ground floorNot to scale
Zone ARaw material4 staffA Zone BCNC turning18 machines · 24 staffB Zone C5-axis12 machines · 20 staffC Zone DMetrologyHeld at 20°CD Zone EPacking10 staffE
CNC turning area with an operator measuring a first article with calipers Stop 2 of 5

Zone B · CNC turning

Bar stock is turned to outside diameter, bore and datum faces here. Each machine keeps its first article and gauges beside it, and both are handed over with the first-article record at shift change.

Machines
18
Staff
24
Area
3,600 m²

JUCHENG outsources no process steps. From bar stock to sealed carton, every part stays inside this plant.

Reliable lead times
start with a fixed daily routine

Two shifts: day shift runs staffed machines, night shift runs batch work lights-out. Each time slot has a fixed job, so parts never sit waiting on someone's desk.

--:--The shop floor runs on this schedule.

  1. Morning handover

    Night shift hands its run logs and any issues to day shift at the machine.

    Zones B, C
  2. First-article inspection

    The first part of every new order goes to metrology. The batch is released only after it passes.

    Zone D
  3. In-process checks

    Every two hours, quality spot-checks key dimensions and logs them on the work order.

    Zones B, C
  4. CMM sampling

    Afternoons are reserved for CMM inspection, with reports filed by lot number.

    Zone D
  5. Packing and dispatch

    Today's shipments are packed in divided cartons, lot-labeled and sent with their reports.

    Zone E
  6. Night shift

    Batch parts run on bar feeders while two staff on duty patrol machines and change tools.

    Zones B, C

Three typical parts

These are sample part types for this template. Replace them with photos and specs you are cleared to publish.

Aluminum locating fixture machined on a 5-axis center
01Semiconductor equipment

Aluminum locating fixture

Holes at multiple angles are finished in one setup, avoiding position error from re-clamping.

7075-T6±0.008 mm600 pcs / month

Route: Zone A → C → D → E

Stainless steel fluid control manifold
02Fluid control

Stainless control manifold

Deep and intersecting bores are leak-tested part by part, with reports shipped alongside.

SUS316100% leak tested300 pcs / month

Route: Zone A → B → C → D → E

Quick-changeover module for an automated line
03Factory automation

Quick-changeover module

Reworked datums and fewer parts cut assembly time and improve locating repeatability after changeover.

Anodized aluminum + alloy steelPart count −39%Small batches

Route: Zone A → B → C → D → E

Four records
shipped with every lot

Every document traces to a lot number. When your quality team needs to trace a part, the carton label leads straight to the machine and shift that made it.

  1. DOC-01Zone A

    Mill certificate

    Chemistry and mechanical properties from the mill, checked against the heat number on receipt.

    Heat no.H24-0917AlloyA6061-T6Checked byStores
  2. DOC-02Zone D

    First-article report

    Full-dimension inspection of the first part of a new order. Production starts only after it passes.

    ScopeAll dimensionsResultPassApproved byQA
  3. DOC-03Zone D

    CMM report

    Sampled inspection of the critical dimensions on your drawing, with measured values and tolerances.

    SamplingAQL 0.65MachinesCMMTemperature20±1°C
  4. DOC-04Zone E

    Outgoing inspection sheet

    Appearance, quantity and packing checks, matched against the lot label on each carton.

    Lot no.JC-26-1031Quantity120 pcsCartons4
ISO 9001 Quality management system (replace with certificate number)ISO 14001 Environmental management system (sample)RoHS Declaration of conformity on request
A plant engineer walks two visitors down the aisle, pointing out a machine
A visit takes about 90 minutesWe plan the route around the zones you pick, then sit down in the meeting room to go over your drawings.

Book a time
to see it in person

Our sales team will call to confirm within one business day. Please wear closed-toe shoes; we provide hard hats and vests.

Zones to see (choose any)

Template demo form. No data is sent.

中文