
CNC turn-mill machining
Shafts, sleeves and multi-face components are assessed for single-setup machining first. Fewer relocations help control accumulated axial and face errors.

CNC turn-mill machining and precision grinding
Every number backed by measurement
Prototypes to medium runs · 24-hour drawing review (illustrative)
A reading close to nominal is not necessarily acceptable. This scale shows both limits and the measured position together.
Current measurement
Acceptance range 19.995–20.005 mm
Assessed against the nominal size and drawing tolerance.
±0.005 mm is an illustrative specification. Feasibility depends on size, material, geometric tolerances and machining conditions.
Turning, milling, grinding and finishing follow the drawing. Confirm locating surfaces and measurement datums before choosing operations, fixtures and inspection points.

Shafts, sleeves and multi-face components are assessed for single-setup machining first. Fewer relocations help control accumulated axial and face errors.

Surface, internal, external and profile grinding begin with enough finishing allowance. Dimensions, roundness and surface roughness are checked separately; appearance does not replace measurement.

Record locating methods, tool life and machining parameters from fixture development and first-article validation through production. Each batch links back to its operations, in-process checks and shipment records.
Strength, corrosion resistance, heat treatment and finish affect the process. Confirm material certificates with suppliers, then account for coating thickness and distortion in the dimensional assessment.

6061 / 7075
Lightweight fixtures and structural parts
Anodising / Hard anodising
Confirm coating thickness and mating dimensions
SUS303 / 304 / 316
Fluid-handling and medical equipment parts
Passivation / Electropolishing
Confirm corrosion resistance and surface acceptance criteria
SKD11 / SKH51
Moulds and wear-resistant parts
Heat treatment / Grinding
Confirm hardness and finishing stock after heat treatment
POM / PEEK / MC Nylon
Insulating and lightweight parts
Precision cutting
Confirm operating environment and measurement conditions
C1100 / Brass
Conductive terminals and mechanical parts
Nickel / Tin plating
Confirm plating thickness and contact dimensions
Ranges are relative illustrations, not millimetres or a fixed ranking of materials. Actual dimensional changes are assessed against the approved drawing, grade and finishing conditions.

Measuring equipment is calibrated regularly. Align the drawing revision, datum, instrument and sampling method before comparing results between operations.
Measure the first article before production, confirm drawing requirements and lock the machining conditions to keep the same error from reaching an entire batch.
Set inspection frequency by risk, track dimensional drift and correct for tool wear and temperature effects.
Perform full dimensional or sampled inspection to the drawing after machining. Key dimensions, material certificates and finishing records accompany shipments as agreed.
Reports filed by batch · Processes and equipment images are illustrative
The application determines which dimensions matter. Review how and where a component is assembled and used before defining tolerances and measurement methods.
Slides, sleeves, locating parts and fixtures
Chamber accessories, sensor mounts and precision mechanisms
Non-implantable equipment parts and stainless steel components
Design validation, short trial runs and fixture improvements
Confirm material, tolerances, quantity and application, and establish dimensional datums.
Arrange operations, tools, fixtures and inspection points.
Measure all dimensions, adjust parameters and confirm production conditions.
Track dimensions through in-process checks and retain batch and exception records.
Complete final inspection and packing, with the agreed inspection documents.
An automation sleeve originally required three setups, allowing concentricity to drift. Turn-mill machining and revised soft jaws reduce datum transfers, alongside tool-life management.

The curves illustrate a narrower distribution; they are not measured data or a statistical analysis. Yield and time figures are illustrative values from the original concept, not actual client results.
Complete information makes process and delivery assessment easier. Tick the items you have prepared, then send the details by email.
Items prepared
Ticks are only for this page. No information is uploaded or stored.
Include the drawing revision, material, estimated quantity and desired delivery date. A preliminary feasibility reply within one working day is followed by machining and inspection planning.
Send quote detailsJuheng Precision is a fictional brand. The email, phone number, response time and service terms are design examples; no live quotation service is provided.